75ZT Community

[Arctic]

Ok so this is not the conventional way to do it but it saves pulling the door cards off, and removing the glass to access the little spring so the thumb pieces come off the car.

You will need some trim tools for the job small piece of rag, just in case i didn't use a rag which you put behind the trim tool because you need to lever off the thumb pieces.

First check ...

[9060davidj]

hi to all
the instrument cluster lcd on my 75 needs repair and i found this company on the internet MG Rover Custom Car Parts has anyone had their ipk repaired by them and how to contact them and how good is their work
david

[suzublu]

Thanks to Steve for going to the trouble of uploading his pictures for renewing a wing again..Got it done eventually

Also massive thanks to Terry Shaw for the wing
Sent from my ABR-NX1 using Tapatalk

[Ed3]

Just some light thoughts here over that it is said that the rear suspension of a Rover 75/ZT is from a BMW E46, and so whether we should modify Rover 75 rear arms to be that of the E46? In case they last longer because the E46 rear arms may look stronger? I paint my rear arms with black Hammerite and that made a rusty second hand pair (that cost me £50 for the pair) ...

[daveo138]

Some cheap 75s and ZTs at Anglia today.

This low mileage Connie Tourer went for a comparatively high price, but seems to have been well looked after. Worth the price, I think.

https://angliacarauctions.co.uk/auction ... eur-estate

[Wetumpka]

Hi all,
where is on a MK2 2005 ZT-T the reverse buzzer located it is not in the rear on the right side. all sensors are working and the reverse lights are working just the buzzer is the problem from where come the beep?
Regards Lee

[daveo138]

Went to Cleethorpes today and spotted a tidy gold tourer.

[Ed3]

https://www.automotivefaults.com/cars/1 ... /2003-2005

[Kymeister]

Hi all, I've been trying to remove the offside rear upper suspension arm on my 2005 conniesseur for AGES, in order to replace - beyond my capacity to drop the whole subframe so just trying to remove it separately. Managed to detach at hub side but the inner bolt is hard to access. Managed to get a 15mil ring spanner on but it just spins endlessly without releasing, seemingly.
Has anyone else here had a ...

[Ed3]

Searching for various I came across another Rover 75 forum where a post describes it as not very active suggesting to new users to post on another Rover forum, ..... but they have recent some posts selling some Rover 75s from older drivers.
https://www.facebook.com/groups/1097980 ... 751864564/