Electric mirror switch not working by Wheelnut


User avatar
Wheelnut
Hi, the switch for the mirrors have stopped working all the other window controls still OK, any thoughts or fixes, please remember I am NO mechanic!! :confused:
Image
Have a trip down memory lane!
On our website
http://www.pastreunited.com/.

Posted 07 Sep 2012, 10:35 #1 

User avatar
takestock
thin blade under the switch assy and it pops out. disc the two electrical connectors.

you will see clips on the side of the switch a thin blade down the side of these will release the top and switches. remove this then lift up the membrane and clean the pads below. re-assemble :)
Photobucket = Tossers

Dave....

Posted 07 Sep 2012, 17:30 #2 

User avatar
Wheelnut
OK thanks, shall have a go in the morning and let you know.
Image
Have a trip down memory lane!
On our website
http://www.pastreunited.com/.

Posted 07 Sep 2012, 18:30 #3 

User avatar
kandyman
User avatar
Duncan
A good tool for the cleaning, is one of the slightly rough erasers found on top of some pencils, or a similar tool!
Image

Posted 11 Sep 2012, 20:09 #5 


Sparky
Had a problem with my mirror switch today which took out a 5 amp fuse near the bottom of the fuse box under the glove box. You will know if this one blows 'cause your ATC (Automatic Temperature Control) and audio will disapear and your car won't start (2.0 CDTi Connie SE Highline). hope you sort it ok.

Posted 12 Sep 2012, 21:01 #6 

User avatar
Wheelnut
Thanks for the help folks, yep all sorted gave it a good clean and off we go it's fine now, thanks for the advice.
Image
Have a trip down memory lane!
On our website
http://www.pastreunited.com/.

Posted 15 Sep 2012, 07:29 #7 

User avatar
kandyman
Glad you got it working.
Image

Posted 15 Sep 2012, 17:32 #8 


les4048
In my 75 I've found as a temporary measure when you hold the switch down give it a wiggle and it makes contact. This temporary measure has now lasted for three months

Posted 16 Sep 2012, 05:45 #9 


Top