Difference between cooling fan control boxes by Bernard


User avatar
Bernard
I've picked up a 2-wire cooling fan complete from a scrapped diesel. I know that there is a difference between the control boxes but can I easily alter the diesel version to suit the petrol engine?
I don't like signatures, they take up too much screen space.

Posted 11 Oct 2011, 21:09 #1 

User avatar
takestock
Nope, the relay boxes are not interchangeable, but the motors themselves are identical. If you take the fan motor from the diesel and wire it up to the petrol relay diagram I have posted, then plug and play :)
Photobucket = Tossers

Dave....

Posted 11 Oct 2011, 21:17 #2 

User avatar
Bernard
Thanks, Dave. All will no doubt be clear when I go over to the workshop again. I was just hoping to cannibalise some of the diesel control box to restore the original which has been modified.
I don't like signatures, they take up too much screen space.

Posted 11 Oct 2011, 21:54 #3 

User avatar
takestock
You can probably do that Mr B. The relays will be the same and the spade connectors on the wiring :). It's just the diesel one incorporates a pcb, the petrol one is as per Artic's picture on the other thread with just two relays .
Photobucket = Tossers

Dave....

Posted 12 Oct 2011, 05:57 #4 

User avatar
Bernard
I'll give that a try. Got to have it all fixed for the weekend. ;)
I don't like signatures, they take up too much screen space.

Posted 12 Oct 2011, 08:34 #5 

User avatar
Arctic
(Trader)
So this box should join to the two speed and then its plug and play
Image7
Pearl Firefrost
ARCTIC

Posted 12 Oct 2011, 09:39 #6 


Top