Wiring diagram for two-wire cooling fan. by Bernard


User avatar
Bernard
Has anyone got a wiring diagram of the control box for the two-wire fan please?

The only diagram that I can find is for the 3- speed showing 3 relays.
I have 2 relays in the control box and the wiring has been altered to give just a single fast speed which probably accounts for the fan motor failure.
I don't like signatures, they take up too much screen space.

Posted 05 Oct 2011, 10:31 #1 


Mad-Monkey
If no one has it, try Jules.

Posted 05 Oct 2011, 10:45 #2 

User avatar
Duncan
Dave (Takestock) posted the info on a thread where Steve (Arctic) was trying to sort his two speed out. Ignore any diagrams from the workshop manual, they are wrong and misleading.
Image

Posted 05 Oct 2011, 12:03 #3 

User avatar
takestock
the one I did was for a two speed motor fitted to a three speed diesel relay box. sorry :(

Let me have a look in me shed, sure I have one ;)
Photobucket = Tossers

Dave....

Posted 05 Oct 2011, 18:10 #4 

User avatar
takestock
Here you go :) just knocked this together ;)

Feel free to add it to the archives Mick

Image
Photobucket = Tossers

Dave....

Posted 05 Oct 2011, 18:58 #5 

Last edited by takestock on 07 Oct 2011, 11:55, edited 1 time in total.

User avatar
Bernard
Thanks Dave, I think that I may have more wires than that.
I should be able to sort it from that though.
I don't like signatures, they take up too much screen space.

Posted 05 Oct 2011, 19:16 #6 

User avatar
Arctic
(Trader)
HI Dave/Bernard.
Is this not the same wiring as the diagram or am i just confusing things sorry if i am Arctic.
Image7
Pearl Firefrost
ARCTIC

Posted 05 Oct 2011, 21:13 #7 

Last edited by Arctic on 12 Oct 2011, 09:37, edited 1 time in total.

User avatar
takestock
That is exactly the same, the part you can see. It's the parts you cannot see that may be different
Photobucket = Tossers

Dave....

Posted 05 Oct 2011, 21:26 #8 

User avatar
Arctic
(Trader)
HI Dave the parts you can not see are just the loom no motor but in theother thread i have a 1.8t motor with three wires would that not work if one of the wires were cut :confused: tell me to go back to sleep if i am in anyway confusing this :lol:

Image2

This is the control box to the said fan.6
Image6
Pearl Firefrost
ARCTIC

Posted 05 Oct 2011, 21:57 #9 

User avatar
takestock
The relay box is the same, the motor is different, the one with the resistor having only two wires, the three wire motor from the 1.8 would appear to be compatible but why would you? The 1.8 motor has almost certainly been identified as a clone of the three speed motor without the fourth brush and hence will have the same failure rate.

Now, go back to sleep :D :D :D
Photobucket = Tossers

Dave....

Posted 06 Oct 2011, 06:07 #10 

User avatar
Arctic
(Trader)
takestock wrote:The relay box is the same, the motor is different, the one with the resistor having only two wires, the three wire motor from the 1.8 would appear to be compatible but why would you? The 1.8 motor has almost certainly been identified as a clone of the three speed motor without the fourth brush and hence will have the same failure rate.

Now, go back to sleep :D :D :D



:cheers: Dave :sleep: :sleep: :iagree: :lol: :lol:
Pearl Firefrost
ARCTIC

Posted 06 Oct 2011, 21:33 #11 


Top