Gate Keeper wrote:Mad-Monkey wrote:Gate Keeper wrote:Mad-Monkey wrote:Raistlin has done it, complete retrofit to factory standard and I did his ZCS coding. Works a charm and IMO worthwhile doing a proper job as then there are never any doubts or worries.
When you did the retrofit, did you get a 'short to earth' fault code flash up for the lights and if so, where did it come from? Many thanks
We initally got a short to ground on the sensors which would not clear. However, the lights worked perfectly, all self levelling at the right time etc... When the car was put on the T4 a while later, at a nano probably, the errors had gone... I was stumped why they were there in the first place, and even more so that they disappeared. Unless I cleared them and forgot about them!
What a coincidence, exactly the same behaviour as in my old V6. The T4 man who had these codes flash up, thinks it is due to damp coming in - tracking from the wheel arch. He proposes going through the wires one by one. I was hoping you had found the cause to make his task a little easier. Not to worry. I am glad you had no more trouble The other option is, that as everything is in working order, that I do nothing. Or, work through a solution in case it happens to anyone else and clear the codes Thanks for getting back to me Sir!
Mad-Monkey wrote:Gate Keeper wrote:Mad-Monkey wrote:Raistlin has done it, complete retrofit to factory standard and I did his ZCS coding. Works a charm and IMO worthwhile doing a proper job as then there are never any doubts or worries.
When you did the retrofit, did you get a 'short to earth' fault code flash up for the lights and if so, where did it come from? Many thanks
We initally got a short to ground on the sensors which would not clear. However, the lights worked perfectly, all self levelling at the right time etc... When the car was put on the T4 a while later, at a nano probably, the errors had gone... I was stumped why they were there in the first place, and even more so that they disappeared. Unless I cleared them and forgot about them!
Gate Keeper wrote:Mad-Monkey wrote:Raistlin has done it, complete retrofit to factory standard and I did his ZCS coding. Works a charm and IMO worthwhile doing a proper job as then there are never any doubts or worries.
When you did the retrofit, did you get a 'short to earth' fault code flash up for the lights and if so, where did it come from? Many thanks
Mad-Monkey wrote:Raistlin has done it, complete retrofit to factory standard and I did his ZCS coding. Works a charm and IMO worthwhile doing a proper job as then there are never any doubts or worries.