75ZT CommunityA social community of enthusiasts, owners, appreciators and collectors. With expert knowledge of all things from MG to Rover and beyond.2012-06-05T16:46:27+00:00https://www.75ztcommunity.co.uk/feed.php?f=2&t=5631&mode2012-06-05T16:46:27+00:002012-06-05T16:46:27+00:00https://www.75ztcommunity.co.uk/viewtopic.php?t=5631&p=51718#p51718
]]>2012-06-04T13:08:02+00:002012-06-04T13:08:02+00:00https://www.75ztcommunity.co.uk/viewtopic.php?t=5631&p=51628#p51628
]]>2012-06-04T12:59:25+00:002012-06-04T12:59:25+00:00https://www.75ztcommunity.co.uk/viewtopic.php?t=5631&p=51627#p51627
]]>2012-06-04T11:47:34+00:002012-06-04T11:47:34+00:00https://www.75ztcommunity.co.uk/viewtopic.php?t=5631&p=51622#p51622Cutting, you will need a diamond wheel, preferably, although they can be scribed and snapped for straight cuts. In which case a rough file for tidying up edges. Grout lines, your choice of spacing. Usually 1/4" on flooring. Finishing. I used to use HG Green polish. Now known as HG Impregnating Sealer followed by Golv polish. Now known as HG Satin Gloss Polish. http://www.tilefixdirect.com/category/h ... tAod430nSw
If you are going for a ready sealed type of tile you can ignore the polish info above. Those are for unglazed tiles.
You might consider a floor levelling compound if the substrate is more uneven than can be taken up with the adhesive. Something like this. http://www.diy.com/nav/build/building-m ... g-10487625
]]>2012-06-04T11:35:44+00:002012-06-04T11:35:44+00:00https://www.75ztcommunity.co.uk/viewtopic.php?t=5631&p=51618#p51618 Did a conservatory and a large odd shaped kitchen some years ago and was probably one of the easiest DIY jobs I've ever done.
Best of luck.
]]>2012-06-04T11:08:05+00:002012-06-04T11:08:05+00:00https://www.75ztcommunity.co.uk/viewtopic.php?t=5631&p=51614#p51614 We've had enough of our vinyl flooring and thought about quarry tiles as there is only about 2 sq M. of floor space but I haven't a clue how to use them.